CrazyPixels Forum
http://www.crazypixels.com/forum/

Stolen Cams Detection
http://www.crazypixels.com/forum/viewtopic.php?f=12&t=174
Page 1 of 1

Author:  Alers [ Thu Apr 23, 2009 12:05 pm ]
Post subject:  Stolen Cams Detection

Hi...

Is it possible, that you put in a trigger, if a signal is lost for more than x minutes, that a mail / sms is sending to diff. peoples sim likes an alarm-message?

Why?

If a cam is stolen there is no real point to check this event...

and the motion-detection does not runs at this point. i testet it and nothing appears...

and now i am dreaming ;-) :

could you than enter a menu, that in the event of stolen camera, a isdn-connection builds up, and a wave-file sending it ( like that :
1. cam is stolen/defect
2. camuni get this info
3. camuni start a isdn-connection / audio to the owner
4. camuni plays per audio on isdn-conn a wave file like
==> "Hey Boss, Camera1 is stolen or defect, please let John check this cam"
5. camuni open a window like ,,Is camx stolen [YES] [NO]" and in the case of yes, it paused the recording of camx.
6. John could check the cams clicks yes or no
7. chief is lucky, that camuni informs so quickly.
8. thief was catched, the cam was in his bag, is on wall mounted again, and all are lucky (without the thief)...

??

Possible?

in this century? ;-)
6.

Author:  Alers [ Thu Apr 23, 2009 12:07 pm ]
Post subject:  the dream goes on

At Point 4. :

Could it be, that we choosed ISDN or SMS ? Coz SMS is much easier... and i think the chief takes hi mobile cell phone everytime in his jacket or so...

:-)

Author:  SFX Group [ Tue May 19, 2009 10:39 am ]
Post subject:  Re: Stolen Cams Detection

I was kinda hoping for a "no signal" event so i can put a "CAM OFFLINE" image, that could spring other events as well...

Many Thanks

Alers wrote:
Hi...

Is it possible, that you put in a trigger, if a signal is lost for more than x minutes, that a mail / sms is sending to diff. peoples sim likes an alarm-message?

Why?

If a cam is stolen there is no real point to check this event...

and the motion-detection does not runs at this point. i testet it and nothing appears...

and now i am dreaming ;-) :

could you than enter a menu, that in the event of stolen camera, a isdn-connection builds up, and a wave-file sending it ( like that :
1. cam is stolen/defect
2. camuni get this info
3. camuni start a isdn-connection / audio to the owner
4. camuni plays per audio on isdn-conn a wave file like
==> "Hey Boss, Camera1 is stolen or defect, please let John check this cam"
5. camuni open a window like ,,Is camx stolen [YES] [NO]" and in the case of yes, it paused the recording of camx.
6. John could check the cams clicks yes or no
7. chief is lucky, that camuni informs so quickly.
8. thief was catched, the cam was in his bag, is on wall mounted again, and all are lucky (without the thief)...

??

Possible?

in this century? ;-)
6.

Page 1 of 1 All times are UTC + 2 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/