CrazyPixels Forum

Diffrent urls for motion detection and recording
Page 1 of 1

Author:  cptor [ Wed Apr 16, 2008 4:23 am ]
Post subject:  Diffrent urls for motion detection and recording

CamUniversal looks very promising however i find it lacking one major thing.
For network cameras, I want to be able to monitor and record remote cameras for motion detection. There seems to be no way in CamUniversal of specifying different urls.

For example, I want to be able to have motion detection and preview use the url:
http://<IP address>/axis-cgi/mjpg/video.cgi?fps=1&resolution=320x240

that way when passively monitoring it it would use much less network bandwidth. But once motion detection is trigger or video is being recording, just use http://<IP address>/axis-cgi/mjpg/video.cgi whitch will return 640x480 and 15fps

also for image capture it could be using http://<IP address>/axis-cgi/jpg/image.cgi insted o taking still fraes from the video source.

Author:  Marc [ Tue Jul 08, 2008 4:56 pm ]
Post subject: 


different URLs for different purposes are not supported at the moment.

What you can do is to add your netcam twice (as 2 netcams).
One uses the URL with the low resolution for picture capturing, preview etc.
and the second one the URL with the high resolution for recording and motion detection.

Page 1 of 1 All times are UTC + 2 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group