Webcam resolution too high

Johann · **Joined:** Mon Sep 07, 2009 12:20 pm **Posts:** 5

Hello,

my webcam resolution is 1920x1080, so the video recorded is too big (100 Mo for 1 min).

I'm going in video setting and try to put it in smaller resolution (648x480 or other), but camuniversal says : this size is not available...

Have you got a solution?

I'm with Windows 10 and camuniversal 5.0.0.0. My webcam is Intel Realsense SR300

Thank you

Marc · **Posted:** Thu Oct 06, 2016 3:55 pm

Hello,

if a different resolution couldn't be set, then there could be a problem with the DirectShow rendergraph.
The dialog for changing the resolution comes direct from the camera driver.

CamDVR uses a different kind of rendergraph.
For a test you can try if you can select in CamDVR different resolutions.

Do you run more than this cameras?

Johann · **Joined:** Mon Sep 07, 2009 12:20 pm **Posts:** 5

No, I have only one camera, but Windows display 3 camera:

Intel(R) RealSense(TM) Camera SR300 Depth
Intel(R) RealSense(TM) Camera SR300 RGB
Intel(R) RealSense(TM) Camera SR300 Virtual Driver

The Depth display only a green picture
The RGB display only 1920x1080
And the Virtual Driver display only 320x180

daniel0 · **Posted:** Fri Jul 28, 2017 5:04 pm

Which one from these three:
Intel(R) RealSense(TM) Camera SR300 Depth
Intel(R) RealSense(TM) Camera SR300 RGB
Intel(R) RealSense(TM) Camera SR300 Virtual Driver
is the best? :?:

Holmer · **Joined:** Mon Dec 04, 2017 2:12 pm **Posts:** 1

I'm having the same issue. I'd like to lower the resolution but I'm getting an error. What's the software you would recommend for this?

CrazyPixels Forum

Webcam resolution too high

Who is online