CrazyPixels Forum
http://www.crazypixels.com/forum/

Webcam resolution too high
http://www.crazypixels.com/forum/viewtopic.php?f=3&t=5306
Page 1 of 1

Author:  Johann [ Wed Oct 05, 2016 11:46 pm ]
Post subject:  Webcam resolution too high

Hello,

my webcam resolution is 1920x1080, so the video recorded is too big (100 Mo for 1 min).

I'm going in video setting and try to put it in smaller resolution (648x480 or other), but camuniversal says : this size is not available...

Have you got a solution?

I'm with Windows 10 and camuniversal 5.0.0.0. My webcam is Intel Realsense SR300

Thank you

Author:  Marc [ Thu Oct 06, 2016 3:55 pm ]
Post subject:  Re: Webcam resolution too high

Hello,

if a different resolution couldn't be set, then there could be a problem with the DirectShow rendergraph.
The dialog for changing the resolution comes direct from the camera driver.

CamDVR uses a different kind of rendergraph.
For a test you can try if you can select in CamDVR different resolutions.

Do you run more than this cameras?

Author:  Johann [ Fri Oct 07, 2016 10:19 am ]
Post subject:  Re: Webcam resolution too high

No, I have only one camera, but Windows display 3 camera:

Intel(R) RealSense(TM) Camera SR300 Depth
Intel(R) RealSense(TM) Camera SR300 RGB
Intel(R) RealSense(TM) Camera SR300 Virtual Driver

The Depth display only a green picture
The RGB display only 1920x1080
And the Virtual Driver display only 320x180

Author:  daniel0 [ Fri Jul 28, 2017 5:04 pm ]
Post subject:  Re: Webcam resolution too high

Which one from these three:
Intel(R) RealSense(TM) Camera SR300 Depth
Intel(R) RealSense(TM) Camera SR300 RGB
Intel(R) RealSense(TM) Camera SR300 Virtual Driver
is the best? :?:

Page 1 of 1 All times are UTC + 2 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/