| Problem |
Possible Solution |
| You press the take a picture
button in the main dialog and no picture is taken. |
Select a different video format.
Press the video format button in the main dialog. 24 bit RGB
should be the best. If you already have selected 24 bit RGB,
select a different format. |
| You hide the preview window and
now the motion detection always displays 0.00 % area change.
Or the WebCam-Control-Center is running behind a screensaver
and the motion detection always displays 0.00 % area change. |
It is necessary to select 16/24/32
bit RGB as the video format. Press the video format button in
the main dialog and select 24 bit RGB for best results. |
| In the select relevant areas
dialog appears no OK button. |
Select a smaller font for the
windows desktop or try to select a smaller resolution for the
video window. |
| Within the FTP transfer the program
hangs. |
Check all FTP settings. Check
if the files from the choose files to transfer dialog are all
available. Be patient if an error occurs within the FTP transfer.
The functions are still trying to connect or to upload. In the
future I will program a separate thread for the FTP client to
make it possible to quit the transfer in case of an error. |
